Skip to main content

Java installation

Ancestris needs Java and is compatible with Java versions 8 to 21.

If Ancestris does not start, or shows the Ancestris splash screen and stops, it is most generally related to an issue with the Java installation. Either Java is not installed or Ancestris does not find it or finds an incompatible version or finds a corrupted version.

The following sections offer a step-by-step check to ensure Ancestris is using a valid Java version.


General principle

  • You need a Java Runtime Environment (JRE). The JDK (Java Development Kit) is not required, but since the JDK includes a JRE, a JDK alone is also sufficient.
  • Ancestris works with all Java versions listed above. It is compiled in version 8 for better compatibility with the most users. It has been tested with several versions which are LTS (Long Term Support) versions. We do not check systematically with Short Term versions which are obsolete and cannot be downloaded after 18 months but some users regularly confirm that Ancestris works well with all java versions.
  • You can install Java from any vendor. Our users find it easier on Adoptium.


Identify which Java version is set by default

If you don't know if Java is installed or which version is installed, open a command line terminal and type the command line:

java -version
  • If you see an error message in the terminal, then Java is not installed on your system. Ancestris cannot run. Please follow the Install section below to install Java.
  • If you see something like this below where Java version is displayed, it means Java is installed with the indicated version. You may have several versions installed, but this one is the one Ancestris will find, unless you configured Ancestris to do differently.
java version "1.8.0_251"
Java(TM) SE Runtime Environment (build 1.8.0_251-b08)
Java HotSpot(TM) 64-Bit Server VM (build 25.251-b08, mixed mode)

According to the display above, we can see that the installed Java version set by default is version 1.8, aka version 8.

If you have a Java version installed as per the example above, and are happy to use this version, you may disregard the rest of this page. Just install and launch Ancestris.

Troubleshooting

If Ancestris does not start, either Ancestris does not find Java or finds an incompatible version or finds a corrupted version.

Multiple Java versions

If you have multiple versions of Java and would like Ancestris to use another one than the default one, please follow the instructions to force Ancestris to use a specific java version.


    Identify which Java version Ancestris finds

    You only need to worry about what is detailed below if Java is installed and Ancestris does not start.

    To identify the problem, first check if Ancestris finds the Java version you want. To know which Java version Ancestris finds, you will need to check the Ancestris configuration file. Open this file in a regular text editor.

    1. Check the line defining default_options

    This line should look like this:

    default_options="--branding ancestris -J-Xms96m -J-Xmx1g --laf javax.swing.plaf.nimbus.NimbusLookAndFeel"

    If one of the options in this line includes --jdkhome="/path/to/java, make sure the path specified in this option is the path to the Java version you want to use. 

    If this line does not include a java path, follow the instructions below.

    2. Check the line defining jdkhome

    If the line looks like jdkhome="/path/to/java", then make sure the path specified in this option is the path to the Java version you want to use. 

    If the line starts with "#", or if the line does not exist, then it means the line is not used by Ancestris and instead Ancestris uses the default Java version set on your system.


    Install Java

    To install Java version 8 on your system, you can get it from the Oracle's main page, or more precisely:
    - Simple usage version: from the JRE download page (MacOS, Windows, Linux)
    - Developer version: from the JDK download page (MacOS, Windows, Linux)

    A simple way to get an official Java version is also to get it from Adoptium.net

    • If you need to know if your device can run Java, go to this configuration page to learn the minimum needed configuration.



    • If you prefer an Open Source Java version, it is possible to use OpenJDK and you can also install Java from the free Adoptium solution.


    Set the default Java version

    The procedures depend on your operative system.


    Set default version for MacOS

    The version of Java running on your system may be incompatible with Ancestris, so it will not run.

    If you want to keep your current Java version and, for instance, run Java Version 8 (aka 1.8) at the same time, you need to swap Java versions.

    To swap between different Java versions, open a Terminal window and follow the steps below.

    In the following example, the instructions let you set Version 8 (aka 1.8) by default, without removing Java Version 10:

    1/6 - Check which version of Java is set by default

    java -version
echo $jdkhome

    You can see the java version you are running.

    2/6 - Get a list of all installed versions on your system and check Version 8 or 11 is among them

    /usr/libexec/java_home -V

    If the version you want is not in the list, then install it as explained in this section.

    If it is in the list, but not the one you had above, force the path to the java version with the following step.

    3/6 - Type in the following 2 lines in the Terminal

    echo 'export JAVA_HOME=`/usr/libexec/java_home -v 1.8`' >>~/.bash_profile
echo 'export jdkhome==`/usr/libexec/java_home -v 1.8`' >>~/.bash_profile

    These two lines will add the command to set your default Java version in your personal profile. Here, we force version 1.8 (or 8). Replace with your java version.

    The first line defines the default Java version for all programs (JAVA_HOME, in uppercase).

    The second line defines the default Java version to use for Ancestris (jdkhome, lowercase).

    4/6 - Close the Terminal

    exit

    5/6 - Reopen a Terminal and check that the running Java is now the one you want (version 8 in our example)

    java -version
echo $jdkhome

    You can now start Ancestris.

    6/6 - Start Ancestris

    When Ancestris starts, a Terminal window opens at the same time.

    You can see in the title bar that version 8 of Java is being used by Ancestris.


    Set default version for Windows

    You have to create a BAT file per Java version you wish to keep.

    Use your favourite text editor to create those files, using the code below, and place them in a folder available from your PATH.

    JAVA8.BAT

    @echo off
echo Setting JAVA_HOME
set JAVA_HOME=C:\Program Files\Java\jdk1.8.0_12
echo setting PATH
set PATH=C:\Program Files\Java\jdk1.8.0_12\bin;%PATH%
echo Display java version
java -version

    JAVA11.BAT

    @echo off
echo Setting JAVA_HOME
set JAVA_HOME=C:\Program Files\Java\jdk1.11.0_11
echo setting PATH
set PATH=C:\Program Files\Java\jdk1.11.0_11\bin;%PATH%
echo Display java version
java -version

    While creating these files, make sure you specify the correct name for the Java files for the lines JAVA_HOME, depending on your Java installation

    When you decide to change the Java version, just run the corresponding BAT file: JAVA8 for version 1.8, or JAVA11 for version 11. The Java version at use will be shown on the terminal.

    To check if the change is really in effect, type java -version on a console or check this page.

    If you wish to keep your latest Java version and force the use of another version of Java for Ancestris, you have to change the configuration file, line jdkhome="C:\path\to\java"


    Set default version for Linux

    Type the following on a console :

    sudo update-alternatives --config java


    en_linux-java-versions.png

    Select from the list the version needed.

    If you wish to keep your latest Java version and force the use of another version of Java for Ancestris, you have to change the configuration file, line jdkhome="/path/to/java"

    To get help using this tool :

    sudo update-alternatives -l



    Force Ancestris to use a specific Java version

    Whatever your operating system is, if the default active Java version is different from the one to be used with Ancestris, you have to modify Ancestris's configuration file like this:

    jdkhome="/path/to/java"
    Case of Windows and Linux

    For Windows or Linux for example, if the java executable is /usr/java/jdk1.8.0_291-amd64/bin/java, then you must indicate

    jdkhome="/usr/java/jdk1.8.0_291-amd64/"

    Note: you have to exclude /bin/java in the path description.

    Case of MacOS

    For MacOS, if for example Java 18 and Java 17 are installed on your Mac and you want to force the use of Java 17 for Ancestris, the complete manipulation to force the version of Java would be the following:

    • Edit the Ancestris application configuration file
      /Applications/Ancestris.app/Contents/Resources/ancestris/etc/ancestris.conf
    • Look for the line #jdkhome="/chemin/vers/java" and suppress the starting character # in order to uncomment the line so that Ancestris takes it into account.
    • Replace the value to the Java path you want to use, for instance temurin-17 here, so that the line reads:
    • Save the modified ancestris.conf file and check that it has been saved correctly.
    • Restart Ancestris.
    Points of attention whatever your operating system

    Warning 1 : If the java directory does not exist, in this case temurin-17.jdk in the previous example, then Ancestris will not launch because it will not find Java.

    Warning 2: If the jdkhome line is also defined in the personalized Ancestris configuration file, its value will take priority over that of the application configuration file. See the corresponding Ancestris configuration file page.







    Back to top