Skip to main content

Java installatie

Ancestris heeft Java nodig en is compatible met Java 8 (ook genoemd 1.8) en Java 11. We bevelen aan dat je Java 8 gebruikt.

Als Ancestris niet wil starten, of je ziet het Ancestris fout scherm en het stopt, meestal is dit een probleem met de Java installatie. Of Java is niet geïnstalleerd, of Ancestris kan kan Java niet vinden, of het vindt een niet compatible versie, of het vindt een beschadigde Java versie.

Het volgende gedeelte biedt een stap-voor-stap controle om zeker te zijn dat Ancestris een geldige versie 8 van Java gebruikt.

GeneralAlgemeen principleprincipe

  • YouJe needhebt a een Java Runtime EnvironmentEnviiremont (JRE) nodig..  The De JDK (Java Development Kit) is notniet required,vereist, butmaar sinceomdat thede JDK includestegenwoordig aook JRE,een aJRE bevat is alleen een JDK alone is also sufficient.voldoende.
  • Ancestris workswerkt withmet Java versionsversies 8 anden higherhoger. ItHet is developedontwikkeld in versionversie 8 forof betterhoger compatibilityvoor witheen thebetere mostsamenwerking users.met Itde hasmeeste beengebruikers. testedHet andis worksook ongetest en het werkt ook met met Java 11 anden Java 14, whichdat arezijn LTS (Long Term Support) versions.versies. We docontroleren notniet check onde Short Term versionsversies, whichdie areeindig obsoletezijn anden cannotniet bemeer downloadedgedownload afterkunnen worden na 18 months.maanden.
  • YouJe cankan install aeen JRE fromook anyvan vendoreen andere leverancier gebruiken: Oracle, OpenJdk orof AdoptOpenJdk orof oneéén thatdie youje compiledzelf yourself.hebt samengesteld.
  • TheDe Oracle JRE installationinstallatie iswordt recognizeddoor byalle allsystemen systemsen and programs.programma's herkend.
    • OnlyAlleen thede Oracle versionversie iswordt recognizeddirect directlyherkend bydoor thede programsprogramma's anden doesheeft notgeen requireextra anyinstallatie additionalof configuration.configuratie nodig. 
    • IfAls youje installde Oracle version,versie onlyinstalleert, heeft alleen JRE 8 doesgeen notOracle require registratie any registration with Oracle.nodig.
    • OnOp Windows, theredan is noter onlyniet aalleen een JAVA_HOME variablevariabele orof thede PATH variable,variabele, theremaar er is alsoook aeen registryregistratie keysleutel nodig.
  • IfAls youje optopteert forvoor aeen freegratis distributioninstallatie,, zal you will have to tellje Ancestris wheremoeten yourvertellen installationwaar is.deze installatie staat. In thisdat case,geval, aszoals indicatedhieronder below,beschreven, uncommentwis the de jdkhome line regel in the het ancestis.conf configurationconfiguratie filebestand locateddat staat in thede "etc" directorymap ofvan yourje Ancestris installationinstallatie anden setzet thehier appropriatehet path.juiste pad neer.

 

Identify which Java version is set by default

If you don't know if Java is installed or which version is installed, please visit the official detailed explanation page or directly open a command line terminal and type on the command line:

java -version

There are alternative methods for MacOS and Windows.
   - for MacOS systems, check the step-by-step instructions.
   - for Windows systems, check the step-by-step instructions.

 

  • If you see an error message in the terminal, then Java is not installed on your system. Ancestris cannot run. Please follow the Install section below to install Java 1.8 and then start Ancestris.

 

  • If you see something like this where Java 1.8 is displayed, it means you have the proper version installed and set by default.
java version "1.8.0_251"
Java(TM) SE Runtime Environment (build 1.8.0_251-b08)
Java HotSpot(TM) 64-Bit Server VM (build 25.251-b08, mixed mode)

According to the display above, we can see that the installed Java version set by default is version 1.8, aka version 8.

If Ancestris does not start, either Ancestris does not find it or finds an incompatible version or finds a corrupted version. Please follow the instructions to identify which Java version Ancestris finds.

 

  • If you see a different Java version from 1.8 or 11, it means you have another Java version by default.
java version "10.0.1" 2018-04-17
Java(TM) SE Runtime Environment 18.3 (build 10.0.1+10)
Java HotSpot(TM) 64-Bit Server VM 18.3 (build 10.0.1+10, mixed mode)

According to the display above, we can see that the installed Java version set by default is version 10. Ancestris will not run. Please follow the Install section below to install Java 8. 

Once done, you will then have several Java versions installed on your system.

If you are happy to set Java 8 as the default version, please follow the instructions to set the default java version on your system and then start Ancestris.

If you would rather keep the Java version set as it is, then you need to tell Ancestris to not use the default Java version. Please follow the instructions to force Ancestris to use a specific java version and then start Ancestris.

 

Identify which Java version Ancestris finds

To know which Java version Ancestris finds, you will need to check the Ancestris configuration file.

1. Check the line defining default_options

This line should look like this:

default_options="--branding ancestris -J-Xms96m -J-Xmx1g --laf javax.swing.plaf.nimbus.NimbusLookAndFeel"

If one of the options in this line includes --jdkhome="/path/to/java, make sure the path specified in this option is the path to Java version 1.8. Otherwise, edit the configuration file and change it. Then launch Ancestris.

If this line does not include a java path, follow the instructions below.

2. Check the line defining jdkhome

If the line looks like jdkhome="/path/to/java", then make sure the path specified in this option is the path to Java version 8. Otherwise, edit the configuration file and change it. Then launch Ancestris.

If the line starts with "#", or if the line does not exist, then it means the line is not used by Ancestris and that Ancestris uses the default Java version set on your system.

If the default version checked above was Java 8, it means your installed Java 8 version might be corrupted. Try reinstalling it using the Install instructions and restart Ancestris.

 

Install Java

To install version Java 8 on your system, you can get it from the Oracle's main page, or more precisely, directly from the download page.

  • If you need to know if your device can run Java, go to this configuration page to learn the minimum needed configuration.

 

 

  • If you prefer an Open Source Java version, it is possible to use OpenJDK and you can also install Java from the free AdoptopenJDK solution.

 

Set the default Java version

The procedures depend on your operative system.

 

Set default version for MacOS

The version of Java running on your system may be incompatible with Ancestris, so it will not run.

If you want to keep your current Java version and, for instance, run Java Version 8 (aka 1.8) at the same time, you need to swap Java versions.

To swap between different Java versions, open a Terminal window and follow the steps below.

In the following example, the instructions let you set Version 8 (aka 1.8) by default, without removing Java Version 10:

1/6 - Check which version of Java is set by default

java -version
echo $jdkhome

You can see the java version you are running.

2/6 - Get a list of all installed versions on your system and check Version 8 or 11 is among them

/usr/libexec/java_home -V

If the version you want is not in the list, then install it as explained in this section.

If it is in the list, but not the one you had above, force the path to the java version with the following step.

3/6 - Type in the following 2 lines in the Terminal

echo 'export JAVA_HOME=`/usr/libexec/java_home -v 1.8`' >>~/.bash_profile
echo 'export jdkhome==`/usr/libexec/java_home -v 1.8`' >>~/.bash_profile

These two lines will add the command to set your default Java version in your personal profile. Here, we force version 1.8 (or 8). Replace with your java version.

The first line defines the default Java version for all programs (JAVA_HOME, in uppercase).

The second line defines the default Java version to use for Ancestris (jdkhome, lowercase).

4/6 - Close the Terminal

exit

5/6 - Reopen a Terminal and check that the running Java is now the one you want (version 8 in our example)

java -version
echo $jdkhome

You can now start Ancestris.

6/6 - Start Ancestris

When Ancestris starts, a Terminal window opens at the same time.

You can see in the title bar that version 8 of Java is being used by Ancestris.

 

Set default version for Windows

You have to create a BAT file per Java version you wish to keep.

Use your favourite text editor to create those files, using the code below, and place them in a folder available from your PATH.

JAVA8.BAT

@echo off
echo Setting JAVA_HOME
set JAVA_HOME=C:\Program Files\Java\jdk1.8.0_12
echo setting PATH
set PATH=C:\Program Files\Java\jdk1.8.0_12\bin;%PATH%
echo Display java version
java -version

JAVA11.BAT

@echo off
echo Setting JAVA_HOME
set JAVA_HOME=C:\Program Files\Java\jdk1.11.0_11
echo setting PATH
set PATH=C:\Program Files\Java\jdk1.11.0_11\bin;%PATH%
echo Display java version
java -version

While creating these files, make sure you specify the correct name for the Java files for the lines JAVA_HOME, depending on your Java installation

When you decide to change the Java version, just run the corresponding BAT file: JAVA8 for version 1.8, or JAVA11 for version 11. The Java version at use will be shown on the terminal.

To check if the change is really in effect, type java -version on a console or check this page.

If you wish to keep your latest Java version and force the use of another version of Java for Ancestris, you have to change the configuration file, line jdkhome="C:\path\to\java"

 

Set default version for Linux

Type the following on a console :

sudo update-alternatives --config java

 

en_linux-java-versions.png

Select from the list the version needed.

If you wish to keep your latest Java version and force the use of another version of Java for Ancestris, you have to change the configuration file, line jdkhome="/path/to/java"

To get help using this tool :

sudo update-alternatives -l

 

 

Force Ancestris to use a specific Java version

Whatever your operating system is, if the default active Java version is different from the one to be used with Ancestris, you have to modify Ancestris's configuration file like this:

jdkhome="/path/to/java"

Reversely, if this line is not commented out, that is if it does not start with the "#" character, Ancestris will take it into account first and the path indicated to the Java version must exist and correspond to a functional version of Java. Otherwise Ancestris will not look for other locations for a better Java version and Ancestris will not start.

 

 

Back to top