Skip to main content

Entities

An entity in the Gedcom standard is a main genealogical component such as an individual, a family, a source of information or a note. It can also be an multimedia object such as a video or a audio record.

In thea Gedcom file, an entity is a record identified by an identification number and a group of tagtags specifying its characteristics.

The various genealogical characteristics associated with an entity are called properties:properties: birth, marriage, date, place, event, text, address, etc.

Ancestris follows the Gedcom standard as closely as possible and uses the same conceptconcepts of entity and property.

The organization of information for each entity follows the precise grammar of the standard. This grammar provides several  possibilities to store the information. To see these various possibilities in Ancestris, use the Gedcom editor.editor.

 

The 7 categories of entities

There are seven categories of entities in the Gedcom standard. An entity always belongs to one, and only one, of these seven categories.

Each category has its dedicated properties. However, regardless of the category to which they belong, all entities operate according to the same principles. There are described below.

In Ancestris, all entities are easily accessible from the Entity Table.

 

IndividualIndividuals

An individual, or a person, is a human being, living or deceased. It is the primary component of any genealogy.

In the Gedcom standard, an individual is defined by the INDI tag, and has an identification number which could nearly be anything. In Ancestris, this ID starts with the letter I.

Appearance in Ancestris : Ancestris gedcom tag sexm.png Ancestris gedcom tag sexf.png Ancestris gedcom tag sexin.png INDI Individual

Main properties

The main properties of an individual are:

  • a name, made of a first name and a lastname, and possibily made of other name elements.
  • events such as birth, marriage, occupation, and many others.
  • relationships with other individuals in the genealogy.

Events and relationships are probably the most interesting parts of your genealogy because they are the pieces of information that youthat  will let you understand the life of your ancestors and the stories they could tell you.

Ancestris gedcom tag name.png NAME : name of an individual. This tag can be repeated if the individual is known under several names.

Gedcom syntax:

NAME Lt. Cmndr. Joseph /Allen/ jr.

In this example jr. is considered the suffix of the name. All the information was entered only in the NAME tag without using any sub-tag.

The Gedcom standard provides a detailed structure to store the name of an individual, and specify all the possible elements of a name, in particular NICK and NSFX which are placed at the end of NAME.

Ancestris gedcom tag name.png GIVN  : (given name)  First name. The first name (s) of an individual: itsIts value must be identical to that in the NAME tag. It is an optional tag. The different first names are separated by a comma.
Ancestris gedcom tag name.png NICK : (nick name) A familiar name or nickname, which is used in addition to, or instead of, the last name.
Ancestris gedcom tag name.png NPFX : (name prefix) Name prefix. An element of the name that precedes the lastname (e.g. Master, General, Doctor, etc.)
Ancestris gedcom tag name.png SPFX : (surname prefix) Particle before the Lastname. A complement to the name which is preceding the name, and which is not to be taken into account when sorting lastnames. Different articles / name prefixes are separated by a comma, for example in the name “de la Cruz”, this value must be “de, la”.
Ancestris gedcom tag name.png SURN : (surname) Lastname at birth, family name. Different surnames are separated by a comma.
Ancestris gedcom tag name.png NSFX : (name suffix) Lasname Suffix. A complement to the name, an article, which follows the last name, and which is not to be taken into account when sorting lastnames. Different name suffixes are separated by a comma. Example: eldest, son.
Ancestris gedcom tag note.png NOTE : Note about the individual
Ancestris gedcom tag sour.png SOUR : SourceSource of information proving the existence and the characteristics of the individual.
Ancestris gedcom tag sexin.png ALIA : (alias):alias) Link with another individual entity, indicating that this current individual could be a duplicate of the other one and that one of the two should be removed enventually.eventually. It does mean that the two persons are the same person with a different name. One should use two NAME tags for that, within one single individual entity.

 

FamilleFamily

A family is a couple of human beings, living or deceased, united either by a legal union (e.g. marriage) or by a de de-facto union (e.g. cohabitation)co-living). Most often, one or more children are associated with it.

A family is therefore a structure bringing together two or more individuals (spouse, children) as well as a set of specific properties,properties such as children, as well as the various events associated with it (marriage, divorce, etc.)

In the Gedcom standard, a family is designated by the FAM tag and receives an ID number starting with the letter F in Ancestris.

Appearance in Ancestris : Ancestris gedcom tag fam.png FAM Family

 

Multimedia element

A Multimedia Element is a photo, an audio or video document (a photograph, an audio recording, a film, a copy of a document, etc.) generally intended to be associated with one or more individuals or families or to be associated with a source.

In the Gedcom standard, a multimedia element is defined by the OBJE tag. It has an ID number starting with the letter M in Ancestris.

Appearance in Ancestris : Ancestris gedcom tag obje.png OBJE élémentmultimedia multimédiaelement

Warning ! There are two kinds of multimedia elements: the entity and the property. These two categorieskinds of media, although they have the same tag (OBJE), should not be confused.

  • The multimedia entity can be used by several other entities. It is therefore meant to be shared, collective or common. It is truly autonomous and can exist independently of the entities that refer to it. Example: a audio file specifying your analysis of a research involving several individuals.
  • The multimedia property is intended to qualify a single piece of information of the genealogy. It can only be used once. It is useless when taken out of its context, its connection to the information to which it relates. Example: a video of a newly born child. The multimedia property, unlike the multimedia entity, does not receive any ID number and is only valid for a single property, in a given entity. It can only exist within the entity that includes it. If the entity is deleted, the property disappears with it.

In summary, if the same multimedia object must be assigned to several individuals, several families, etc., it is more efficient to store it in the form of a object entity. Once entered, it will be possible to use it an infinite number of times. As a object property, you would have to reenterre-enter the link to the media file as many times as you would need it.

Warning ! Ancestris does not make any copy of your multimedia files. It just "refers" to the actual files. Ancestris will read them where you will need them in Ancestris. So please do not erase them thinking that Ancestris made a copy of them.

 

Note

A note is a text information that can be associated with other categories of entities (individuals, families, multimedia elements, etc.) or with a property anywhere in the genealogy.

In the Gedcom standard, a note is defined by the tag NOTE and it has an ID number starting with the letter N in Ancestris.

Appearance in Ancestris : Ancestris gedcom tag note.png NOTE Note

Warning ! There are two kinds of notes: the entity and the property. These two categorieskinds of notes, although they have the same tag (NOTE), should not be confused.

  • The note entity can be used by several other entities. It is therefore meant to be shared, collective or common. It is truly autonomous and can exist independently of the entities that refer to it. Example: a text specifying your analysis of a research involving several individuals.
  • The note property is intended to qualify a single piece of information of the genealogy. It can only be used once. It is useless when taken out of its context, its connection to the information to which it relates. Example: a characteristic of a newly born child. The note property, unlike the note entity, does not receive any ID number and is only valid for a single property, in a given entity. It can only exist within the entity that includes it. If the entity is deleted, the property disappears with it.

In summary, if the same note must be assigned to several individuals, several families, etc., it is more efficient to store it in the form of a note entity. Once entered, it will be possible to use it an infinite number of times. As a note property, you would have to reenterre-enter the text of the note as many times as you would need it.

 

Source

A source is anything that defines the origin of a piece information. It can be a document, a book, a monument, etc.

It can also be a natural person: your great-grandmother can, for example, be qualified as a source, if she has transmitted a family history to you orally for instance.

This entity is intended to collect very precisely the various references (document title, symbol, act number, page, etc.) in order to allow any subsequent verification of the characteristics of other entities (in particular, individuals and families).

In the Gedcom standard, a source is defined by the SOUR tag and it has an ID number starting with the letter S in Ancestris.

Sources maintain a close relationship with other entities, repositories. A repository contains sources, and sources are located in repositories. Please refer to the following section for detailed considerations.considerations on how to organze sources and repositories.

Appearance in Ancestris : Ancestris gedcom tag sour.png SOUR Source

Warning ! There are two kinds of sources: the entity and the property. These two categorieskinds of sources, although they have the same tag (SOUR), should not be confused.

  • The source entity can be used by several other entities. It is therefore meant to be shared, collective or common. It is truly autonomous and can exist independently of the entities that refer to it. Example: a marriage deed.
  • The source property is intended to qualify a single piece of information of the genealogy. It can only be used once. It is useless when taken out of its context, its connection to the information to which it relates. The source property, unlike the source entity, does not receive any ID number and is only valid for a single property, in a given entity. It can only exist within the entity that includes it. If the entity is deleted, the property disappears with it.

In summary, if the same source must qualify several events of individuals, families, etc., it is more efficient to store it in the form of a source entity. Once entered, it will be possible to use it an infinite number of times. As a source property, you would have to reenterre-enter the characteristics of the source as many times as you would need it.

 

Submitter

A submitter is a person who collects information to contribute to the construction of a genealogy file.

This person is likely to be one of the authors of the genealogy, or any genealogists likely to provide the Ancestris user with their genealogical information.

In the Gedcom standard, a submitter is defined by the SUBM tag and it has an ID number starting with the letter B in Ancestris.

Appearance in Ancestris : Ancestris gedcom tag subm.png SUBM Submitter

 

Repository

A repository is a place where genealogy sources can be found (documents, books, audio recordings, films, etc.). It can be a physical building (e.g. archive, cemetary)cemetery), or a website (e.g. the website of the archive service).

Repository entities maintain a close relationship with source entities. A repository is likely to contain several sources, a source belongs to a repository.

In the Gedcom standard, a repository is defined by the REPO tag and it has an ID number starting with the letter R in Ancestris.

Appearance in Ancestris : Ancestris gedcom tag repo.png REPO Lieu de stockage

 

Header entity

The header entity is the first record of the Gedcom file. The header contains information about the file: version of the standard (5.5 or 5.5.1), the author of the file, structure of jurisdictions in places, etc.

Its creation is taken care of by Ancestris when creating a new file. You most probably will not need to change it after creation.

In Ancestris, it can be edited using the Menu > File > Properties. Refer to the File Properties page for more details.

 

Identification number of an entity

The ID number is an identification number assigned to each entity, within the same category. In order to avoid the creation of possible duplicates, this number is obviously unique.

Moreover, this particular number always has the same form, namely a letter followed by a certain number of digits. Each category of entity being associated with a particular letter, the first letter of the ID number indicates the category to which it belongs.

The user does not have to worry about assigning a new ID number when creating a new entity: this numbering is carried out automatically by Ancestris.

Note that in the Tools / Preferences / Editions / Identification number menu, a check box can be activated to reuse the ID numbers left available by entities that have been deleted.

Also, you can always change ID numbers later once entities have been created. Use the Generate ID Numbers tool for that.