The Dynamic tree shows a genealogy in the form of a tree.
You can quickly select any individual in the tree, and you can also use this view to build the tree.
The view is the closest to that of a traditional family tree, and it best captures the simple relationships between individuals and their families.
The Dynamic tree is displayed below a toolbar.
The tree is structured around a root individual. The tree is actually a "double-tree". Ancestors form a tree on one side of the root individual, and the descendants form another tree on the other side.
Individuals and their families are represented by boxes. These boxes are joined together by lines of filiation, and organized in an ascending and descending tree-like manner.
The tree is a partial view of the genealogy and it does not show all the individuals of the genealogy.
The tree can be displayed vertically (ascending at the top) or horizontally (ascending on the left).
When the tree is too large to be displayed in its entirety, scrollbars at the bottom and on the right allow you to move over the entire tree. You can also use the green minimized-tree to move around the tree.
The root individual is the one around which the double tree is built.
The root can also be a family which does not fundamentally change the display of the tree. For this discussion, we will therefore call it the root individual or simply the root.
Th name of the root is indicated in the tree toolbar. By default, it is the individual -or the family - inside the brown frame, except when it is the selected individual, in which case the border is yellow.
The tree changes each time another individual is chosen as root. This is why the Tree is called dynamic.
Please note that the root individual can be a different person from the selected individual.
Indeed, in order to be able to move in the tree to select one by one the individuals and display them in the views and editors, it is preferable that the tree does not change at each selection of an individual.
The selected individual is the one that appears by default in a yellow frame.
Each box displays information about the individual or the family it represents.
Aspects of the boxes (fonts, alignment, colors, dimensions, etc.) as well as the categories of information they display (name, dates, locations, etc.) can be customized using the blueprints or the Configure view button.
When a descendant of the root has entered into multiple unions, the spouse's box on his or her right-hand side has a button with a plus sign. Each click on this button displays successively all the spouses of the individual.
Boxes can be right-clicked to call the context menu. This is how you add individuals or families to the tree.
By default the outlines of the boxes have the following colors.
It is possible to change these colors. See the paragraph on customization.
This symbol is located between two spouses and indicates that the tree displays families and spouses. It is possible to hide spouses and families.
Buttons are placed at both ends of branches. These are branch contraction and branch extension buttons that allow to fold or unfold a branch. This is to optimize the display of certain parts of the tree.
The toolbar of the dynamic tree lloks like the following:.
Hovering over a button with the mouse gives you the function of the button.
The zoom slider changes the zoom level of the tree in the display area.
Thanks to this cursor, you can instantly adapt the scale of the display area to your needs.
You can also use the Control key and the mouse wheel to change the zoom level.
The overview shows the entire tree as a miniature tree that you can use to move quickly anywhere in the tree, in case the tree does not fit entirely in the display area.
When the overview button on the toolbar is activated, a small overview appears at the top left of the display area.
This window displays a scaled model of the complete tree. We see in yellow and brown the selected and root individuals. Here, they are the same, therefore in yellow.
A new click on the button hides this overview.
Inside this overview, a green rectangle represents the currently visible area of the tree, depending on the size of the window or the size of the screen. Moving this colored rectangle with a mouse drag immediately affects the entire display area, so that some areas that were not visible until now become visible without having to manipulate the scrollbars.
A click on a mini-box inside the overview repositions the tree: the corresponding individual is placed at the center of the display area.
This movement of the tree in the overview or the repositioning click does not modify either the root individual nor the selected individual.
Moreover, it is possible to modify the size taken by the overview, by means of a drag and drop of the mouse from its lower right corner.
This button toggles between vertical and horizontal display of the tree.
This button toggles between two display modes regarding spouses of the root individual and those of his/her descendants. This choice is only possible when the root entity is an individual, and not a family.
Hiding spouses and families saves space in the display area.
Each click on the icon button immediately switches the display to the other mode.
This button toggles between two display modes for the branch contraction or extension buttons.
Hiding these symbols saves space for the display area.
This button toggle between two display modes regarding tree branches, once you have contracted at least one previously.
This is a way to remember the folded branches, and to switch more easily between the two modes, if it is always the same branches that you want to fold.
This button includes two actions, both of which set a new root entity. A click on the button performs the first action. A click on the small down arrow to the right of the button selects one of the following two actions.
This button includes two actions, both of which allow you to re-center the tree. A click on the button performs the first action. A click on the small down arrow to the right of the button selects one of the following two actions.
This button sets the root individual from a list of entities previously registered as bookmarks.
Clicking the button opens up a dropdown list with the bookmarks.
Here is an example of dropdown list with 5 entities that have been bookmarked previously:
This menu is a quick way to rearrange the tree according to the main individuals you most frequently work with.
As bookmarks are fully user-configurable, this menu is empty if you have never defined any bookmark.
To create a new bookmark, use the context menu on the entity you want to bookmark.
You can only put a maximum of 16 bookmarks in the list. If the user tries to create a 17th bookmark, it will replace one of the 16 already saved, which will be permanently deleted without any warning.
The management of the currently saved bookmarks, their order of appearance in the menu and their deletion, is done in the Bookmarks tab of the Configure View window. Check the Customization section at the end of this page.
This button makes a screenshot of the display area and puts it in the clipboard or a file.
In the example below, the captured part will be the green area, and it will be put in the clipboard. This green area can be moved and modified with the mouse (drag and drop or stretch lower right corner).
In the toolbar is then displayed the name of the root individual - or family - of the tree.
This button fixes the display of the selected entity in the tree when you select another entity in another Ancestris view.
If the pin is not pushed, the yellow frame follows the selected entity in Ancestris.
If the pin is pushed, the yellow frame sticks to the individual it was on regardless of the selected entity in other Ancestris views..
This button changes the blueprint of the individuals or families.
The type of blueprints will depend on whether an individual or a family is selected when the button is pressed.
A click on the button opens the list of blueprints corresponding to either an individual or a family.
Ready-to-use templates allow the user to adapt the display to its personal taste. See the Blueprint instructions to change them.
This button customize many elements about the presentation of the dynamic tree. It opens the customization panel of the Dynamic tree view.
The main goals of the dynamic tree view are to :
The Tree displays the ancestors and the descendants of a root individual.
As already mentioned above, the other individuals will not be visible. Your first choice is therefore to choose this root person in such a way as to have the maximum number of individuals in the tree, or at least to make sure you will see the branches you expect to see.
Once chosen, there are several ways to change the root individual.
As soon as a new root is defined, the displayed tree changes and redraws the corresponding ancestors and descendants.
The root entity also becomes the selected entity until another entity is selected.
In order to see or hide elements to optimize the presentation of your tree, use the buttons of the toolbar.
You can also customize the way the tree is displayed and use styles. Refer to the customization section below.
Once the tree looks the way you want, you can print it or make a screenshot of it to keep an image of it.
It is also possible to export the visible individuals to a new Gedcom independent file. To export a branch of the tree, make sure then that only the corresponding branch is unfolded and visible. Then refer to the save as function for the extraction details.
From the root individual, you can navigate through family relationships within the ancestors of the root entity, or within the descendants and their spouses.
In general, navigation within tree entities is done using the mouse.
To navigate within the ancestors of an ancestors of thee root individual, or the descendants of a descendant of the root individual, you do not need to redraw the tree with another root.
You will have to redraw the tree if you want to see the descendants of an ancestor, or the ancestors of a descendant.
For example, to see the brothers and sisters of an individual, set the root individual to their father or any of their ancestors.
Whatever the way of operating, the selection of an individual or a family in the dynamic tree is instantaneously reflected in the other windows.
Selecting an entity does not modify the choice of the root, and therefore has no effect on the structure of the displayed tree.
The root entity is in the brown box. If the brown box is not visible, it is probably because it is also the selected individual. There are indeed two situations resulting in the selected individual and the root individual being the same: it is when the root is selected, or when the selected individual is double-clicked.
The dynamic tree view can also be used as a sort of editor, to add or remove relationships and the corresponding individuals and families.
You can build a tree visually directly from the dynamic tree using the context menu, with a right-click on the individual from which you want to add an entity, or which you would like to remove.
In the Dynamic Tree view, the creation of an individual or a family is done by means of the context menu which opens with a right click on the box of an entity chosen as reference.
Here, you can see the context menu from the individual Jacqueline Bouvier :
When adding an entity, Ancestris asks you via, the following window, to confirm whether you want to create a new entity or link an existing one. Example here to add a brother, as indicated in the last sentence:
In case of a new entry, Ancestris will put you in the default editor on a new individual to start entering its description.
You enter the corresponding information, validate it, and the individual is then added in the tree, provided that the added individual is an ancestor a descendant of the root individual. Otherwise, it has been created but does not appear.
The modification of an individual is either done by selecting on it and then using the editor if one is already open, or else by opening the context menu and chose Edit/Modify.
Make your modifications. They will appear immediately after your validation, as long as they are part of the information displayed in the boxes.
Deleting an individual or family is done through the Context Menu.
Choosing the Delete the selected properties action then confirm your choice.
If the deletion is confirmed, the tree updates its structure immediately.
This can significantly change the tree display if the selected entity was the root or the middle of a branch.
If the root individual is deleted, the tree disappears completely.
If an individual in a branch is deleted, the whole end of the branch disappears.
Customization of the tree can be done using two buttons in the toolbar:
Here is the Configure View window.
Make your modifications in the various tabs.
The tree is modified instantly.
This tab allows you to change navigation settings and display style.
Three styles are predefined by default, and a fourth allows you to define your own.
When you choose a style, the tree changes immediately.
To create your own style, select My Style and then go to set the blueprint, the colors and sizes you want. These will be stored as your style.
The Bookmarks tab is used to manage bookmarks: order and deletion.
It consists of the list of currently saved bookmarks, under which there are three buttons: Up, Down and Delete.
The order of the bookmarks in this list is an exact reflection of the order in which the bookmarks appear in the Bookmark button on the toolbar. To change this order, select the bookmark to be moved from the list, and use the Up and Down buttons.
To delete a bookmark, select it and then click on the Delete button.
This tab does not allow you to create or rename a bookmark. To create a bookmark, see the Bookmark Button paragraph. To rename a bookmark, you must first delete it, then create another one from the same entity and with the appropriate name.
This tab customizes the colors of the connectors between boxes, the borders, and the background of the tree.
The upper area of the Colors tab lists the elements in the tree view whose color can be changed, each line ending with a square of the currently selected color for that element.
When one of the above items is selected with a mouse click, its color can be changed in the lower area.
The lower area of the Colors tab itself contains a number of tabs that are different ways to choose colors.
Choose the color you want, this will update the small square in the element in the upper area.
This tab allows you to choose the font and its size, a display modes, and the size of the boxes.