Skip to main content

Ontwerp je eigen genealogie

Je zal zien hoe gemakkelijk het is, om vanaf het begin, je eigen genealogie met Ancestris te ontwerpen en te onderhouden. Je creëert je eerste individu, je ouders en dichtstbijzijnde familie en dan heb je al heel snel je eerste genealogie bestand met 1 of 2 generaties gemaakt.  

Het ontwerpen van een genealogie start meestal met het aanmaken van de eerste persoon (jezelf?) waarvan je gegevens zoals geboortedatum en -plaats vastgelegd worden.  Daarna worden andere personen toegevoegd zoals b.v. de ouders, broers zen usters en grootouders en hoe zij met elkaar verbonden zijn (relaties).

Het aanmaken van je eerste individu

Tijdens de guided tour (rondleiding) gebruiken we de genealogie van de  Bourbon familie. Dit is een voorbeeld van een genealogie dat door Ancestris ondersteund wordt.

Let'sLaten closewe itdeze andgenealogie createsluiten. aOm new one.To close het Bourbonbestand te sluiten klik je op het kruisje in één van de actieve Bourbon vensters. Nu gaan we onze eigen genealogie maken..

Vanuit de  "Welkom pagina", justklik clickje onop thede redknop cross"Een onnieuwe thegenealogie toolbar when anyaanmaken" of the Bourbon windows is activated. And now, let's create your own genealogy.

From the Welcome page, click the button Create a genealogy or click klik button_create-genealogy.png onop thede toolbar.gereedschap balk.

TheDe creationcreëer wizard willassistent start. FollowVolg thede stepsstappen, untiltot youje get thede dynamicdynamische tree viewstamboom  of aeen treeboom withziet yourself waarin rightjezelf atin thehet centermidden ofte itzien !bent!

 

Op

Onhet theeerste firstscherm screenvan ofde theassistent wizard,vul enterje yourje namevoor- anden sex,achternaam thenen clickgeslacht in. klik daarna klik je op Next"Volgende" (Next).

en-create-1.png

ThenVervolgens entervul theje informationde regardinginformatie thein, authordie ofbetrekking thishebben newop genealogy,de probablyauteur you.van Clickdeze nieuwe genealogie (waarschijnlijk jezelf). Klik op Next"Volgende" (Next)..

en-create-2.png

Define the places format to use across your entire genealogy. Below is the standard format. If you don't know now what it should be, click Next. It can be changed later.

Else, use the available buttons to add, change or delete place criteria, also called jurisdictions. Then click Next.

en-create-3.png

Enter a description for your new genealogy and click Finish.

en-create-4.png

Ancestris will then ask you for the location and file name to save your genealogy information.

en-create-5.png

As you can see, the information is directly saved as a Gedcom file. Gedcom files have the extension ".ged".

Press Create to save. That's it.

Ancestris will now show a genealogy tree in the dynamic tree view. This tree is made up of one person only: you.

On the right hand side, the Cygnus editor is also opened. It shows the individual information details of the person currently selected in the tree.

en-create-6.png

Using the Cygnus editor, you can now complete the missing information, e.g. your birth date and place for instance.

Add a photograph of yourself by clicking in the respective area.

Add other names if necessary.

When finished, in order to save the changes made, click on the OK button that will appear at the bottom right corner, as soon as you change your data in the editor.

Adopt best practices

If you keep on adding people, very soon you will reach hundreds of records: individuals, families, etc.

We recommend you to immediately adopt a consistent and harmonised way to write the frequently used information, such as:

  • surnames (1st letter uppercase or not)
  • occupation descriptions
  • witnesses (use husband's uncle rather than Peter's uncle) to avoid repeating names
  • place names (old spelling or new spelling ?)
  • etc.

Also, if you have your birth certificate at hand, document it now as a source, and as comprehensively as possible. Ancestris is very good at keeping all detailed information.

Create your parents

Creating parent can be done either from the dynamic tree view or from the Cygnus editor.

From the tree, right click the desired individual.

en-create-add-father-tree.png

From Cygnus, we use the buttons for new parents. This is a faster method. The "Father" button is at the top left on the Cygnus editor.

en-create-add-father-cygnus.png

In either case, you get two more boxes on the tree, above your own: your parents. Your father is created, but only a placeholder is visible for your mother. The entity corresponding to her is not yet created.

Ancestris default settings create only one parent at a time. It could be interesting to try and create both. To do so, go to preferences, using the main menu Options / Preferences / Editing, or click on  Preferences_bouton.png  at the top right of the main window.

In the preferences, select the Editing panel, and check the option Automatically create both spouses when adding a parent.

On the father's box, the family name is automatically derived from the individual from which the father was created.

On the Cygnus editor, enter your father's information (name, date and place of birth, etc.). Click the OK button once done, to save the data.

To create the mother, whether right click on the individual and choose Add a spouse or click the corresponding button on the Cygnus editor, or right click your own box and choose Add a mother.

Create your close relatives

Next you can create your brothers and sisters, your wife and children, etc. in the same manner.

If you make a mistake, it is always possible to correct the information directly or simply undo the creation of the new individual by clicking on Undo button on the toolbar and start over.

Once you have created all the individuals of your close family, just click on your box to return to yourself.

Add information about your family

Let's suppose you want to enter your parents wedding date.

Click on the family box, the one between yours and your parents's. It is box number F00001 on the Dynamic tree view below.

In Cygnus, you will see your father's information, and Cygnus will select the nuclear family he constitutes with your mother.

From there, click on the "Marriage" button on the Cygnus editor. The marriage event is created. Indicate the type of marriage (for example : Religious), enter the date and place, if known.

Click OK and that's it. Here is the result:

en-create-family-nucleus.png

This is the current tree:

en-create-family-tree.png

Let's now generate the Sosa numbering for this 3 people family.

Right click on the box representing yourself and choose "Manage Sosa / d'Aboville numbering". A window will open. Just click OK and the Sosa numbering will be created like the following: number 1 for yourself, 2 for your father and 3 for your mother. G1 and G2 codes are the generation numbers.

You should now have something similar to the view below, where the Sosa numbering is visible on every box at the top right corner, above the identification numbers.

en-create-family-tree-sosa.png

This first tree is now finished. Save it on disk by clicking  button_Save.png  on the toolbar.

You can now close your genealogy file by clicking the red cross on the toolbar.

If you hadn't saved your data before, a window would have  poped-up, asking you to save the file.

We will then see the Welcome page again, since it is now the only one opened.

From there, your genealogy will show on the "My Ancestris" tab of the Welcome panel, and at the top left on the section "Last opened genealogies".

From then on, you will probably adopt the habit of opening your genealogy from the Welcome panel.

 


 

You are now ready to take advantage of all the other features of Ancestris. The other chapters of this book will help you do so.

We wish you all the best.