Skip to main content

Leg uw stamboom bronnen vast

In de loop van de tijd zult u veel officiële documenten verzamelen om toe te voegen aan uw stamboom in Ancestris.

Elk document dat u vind zal u genealogie verrijken met personen, gebeurtenissen, bronnen of aantekeningen.

Deze pagina legt u uit, hoe u een akte invoert met behulp van bronnen en archieven.

Het belang van het vastleggen van bronnen van uw stamboom.

Wat de oorsprong ook is, elke goede genealoog moet zijn bronnen tonen: er is geen goede stamboom zonder bronnen.

Alle informatie die samen alle bronnen vormen voor een stamboom kan het resultaat zijn van:

  • Persoonlijk onderzoek (burgerlijke stand, notarissen, begraafplaatsen, diverse archieven, enz.)
  • Delen van gegevens met andere genealogen
  • Verzamelen van mondelinge informatie
  • Bestuderen van familiedocumenten

Zelfs als de bron die je hebt niet de beste is, of niet definitief is, dan baseer je toch noodzakelijkerwijs het bestaan ​​van een persoon of een feit op een informatiebron. Dit wordt uw bron in de stamboom, en u houdt bij waar uw informatie vandaan komt, zelfs als dit betekent dat u later een betere bron moet zoeken.

Bronnen en archieven in uw stamboom

Een bron is dus een originele transcriptie op een medium waarmee informatie die in een genealogie is ingevoerd, kan worden verantwoord. Bijvoorbeeld een parochieregister, een tienjarentafel, een akte van de burgerlijke stand, een akte van een parochieregister, een familieboek, een grafsteen, een video, een audiobestand.

Bovendien moet elke bron aan een archief (Repository) worden gekoppeld.

Een repository (Archief) is de plaats van de fysieke of elektronische opslag, de geografische locatie, die het oorspronkelijke medium (bron) bevat (gemeentehuis, departementale archieven, begraafplaats, adres van het gebouw, enz.) of de website (van de provinciale archieven van een bepaalde regio of plaats).


Hoe moeten bronnen en archieven in Ancestris worden georganiseerd.

Onthoud:

  Een bron (Source) is opgeborgen in een archief (Repository).


In Ancestris en in de Gedcom-specificatie zijn Source-entiteiten opgenomen in Repository-entiteiten.

Wanneer de bron wordt ingevoerd, wordt tegelijk de repository ingevoerd. De repository moet dus op dat moment al bestaan. Daarom is het logischer om de repository aan te maken vóórdat u de bron aanmaakt.

Deze verwijzing naar de repository is echter optioneel. Daarom kunnen we de bron en de repository dus aanmaken op het moment dat we die nodig hebben tijdens het maken van de bron, of later.

Met de editors van Ancestris kunt u de entiteiten dus in de door u gewenste volgorde invoeren. Maar in de praktijk, namelijk in uw onderzoek en bij de volgorde waarin u uw gegevens invoert, is het gebruikelijker, om de repositories vóór de sources (bronnen) in te voeren, vooral omdat dezelfde repository door verschillende bronnen zal worden gebruikt.

Waar bewaart u de bron en het archief?

Al is het aanmaken van een persoon redelijk rechttoe rechtaan, en wel via de entiteit "Persoon", voor het aanmaken van zowel de bron als het archief heeft u een keuze.

Hier zijn de beschikbare mogelijkheden om gegevens in het Gedcom bestand, en dus ook in Ancestris, in te vullen:

nl-document-sources.png


  1.  De gegevens worden ingevuld binnen een Bron property, deze bron-property is een property van een bepaalde gebeurtenis, en die gebeurtenis hoort bij een bepaalde persoon. De gegevens die op deze manier zijn ingevuld, zijn dan niet te delen. Een andere gebeurtenis kan hiernaar dus niet verwijzen. De 3 puntjes geven aan, dat er voor deze gebeurtenis meerdere van dergelijke properties kunnen zijn. Elk vamvan deze bron-properties bevat dan de volgende informatie:
    • Een link naar een Source entity.entity. Deze link heeft dan de volgende kenmerken:
      • De pagina binnen deze bron (Source) - Tag: PAGE
      • De kwaliteit van de bron,bron, op een schaal van 0 tot 3 - Tag: QUAY
        • 0 = Onbetrouwbaar, of afkomstig van schatting
        • 1 = Subjectief (interviews, mondelinge verklaringen, mogelijke vooringenomenheid, autobiografisch)
        • 2 = Bron uit de tweede hand, officiële gegevens gerapporteerd na een gebeurtenis.
        • 3 = Directe en officiële bron van de gebeurtenis.
      • De transcriptie of de tekst van de bron - Tag DATA met de subtag TEXT
      • Links naar multimedia bestanden - Tag OBJE
      • Het type gebeurtenis dat in de bron wordt genoemd. )(Dit kan verschillen van de gbeurtenisgebeurtenis van de persoon waaraan het is gekoppeld.) - Tag EVEN
  2. De gegevens worden ingevuld binnen een Bron entity (Source). Dit s een gegeven dat wel gedeeld kan worden, en het kan de volgende gegevens bevatten:
    • De Soure (bron) titel, dit kantitel, zowel met een lange als met een korte beschrijving zijn.beschrijving. - Respectievelijk met de tags TITL en ABBR.ABBR.
    • De transcriptie van de tekst van de Source (bron) - Tag: TEXT
    • Links naar de multimedia files - Tag OBJE
    • Links naar de Repositories (archieven) waar de Source (bron) kan worden gevonden. - Tag: REPO.REPO.
      • Hierbij is er voor elke Repository, een referentie in die repository met de bijbehorende index.index. (er kunnen er meerdere zijn) - Tag: CALN
        • En voor elke referentie ook nog het type media ondersteuning van de bron ( audio, boek, kaart, elektronisch, recordformulier, film, tijdschrift, manuscript, krant, foto, graf, video) - Tag: MEDI
    • De types van de gebeurtenissendoorgebeurtenissen zoals aangegeven door de bron, tegelijk met de locatie ervan en de tijdsperiode. - Tag: DATA/EVEN/DATE and DATA/EVEN/PLAC
    • De verantwoordelijkeVerantwoordelijke agentAgent - Tag: DATA/AGNC
    • De auteurAuteur die de bron gemaakt heeft - Tag: AUTH
    • En de publicatiePublicatie informatieInformatie (wanneer en waar) - Tag: PUBL.PUBL.
  3.  De gegevens worden ingevuld binnen de Repository entiteit (archief). Dit is een gegeven wat gedeeld kan worden, en het kan de volgende informatie bevatten:
    • De naamNaam van de Repository. - Tag: NAME.NAME.
    • Het fysieke adres van de Repository - Tag: ADDR.ADDR.
    • Het internetInternet adres - Tag: WWW.WWW.
    • Een contact nummer (Telefoon, Email, Fax) - Tag: PHON,PHON, EMAIL,EMAIL, FAX.FAX.

 



====================================================================================


How to organize the information in Ancestris

A source is contained in a repository

Where to store the deed and the register?

If the creation of the individual is pretty straight forward, that is via the creation of the entity 'Individual', a choice exists for both the Source and the Repository.

Here are the available possibilities where we can write things in the Gedcom standard and therefore in Ancestris.

en-document-sources.png

  1. Inside a source property, inside a given event of a given individual or family: it will therefore become a non-sharable piece of data. It cannot be referenced by another event. There can be several such properties for the same given event. Each property will include the following information.
    • Link to a source entity. This link will have the possible following attributes :
      • The page inside the source - Tag: PAGE 
      • The source quality, on a scale from 0 to 3 - Tag: QUAY 
        • 0 = Unreliable or data resulting from an estimate
        • 1 = Subjective (interviews, oral statement, possible bias, autobiography)
        • 2 = Second-hand source, official data reported after the event
        • 3 = Direct, official and instant source of the event
      • The transcription of the text of the source - Tag: DATA and subtag: TEXT
      • Links to multimedia files - Tag: OBJE 
      • The type of event cited in the source (may be different from the event of the individual to which it is attached) - Tag: EVEN 
  2. Inside a Source entity : it will be a shareable piece of data. It may contain the following information.
    • The source title, as a long and a short description - Tags: TITL and ABBR respectively.
    • The transcription of the text of the source - Tag: TEXT
    • Links to the multimedia files - Tag: OBJE
    • Links to the repositories where the source can be found - Tag: REPO
      • For each repository, references in the repository, and its index (there could be several of them) - Tag:CALN
        • And for each reference, the type of media support of the source (audio, book, card, electronic, record, film, magazine, manuscript, newspaper, photo, grave, video) - Tag: MEDI
    • The event types indicated by the source, with their location and time period - Tag: DATA/EVEN/DATE and  DATA/EVEN/PLAC
    • The Risponsible Agent - Tag: DATA/AGNC
    • The Author who created the source - Tag: AUTH
    • The Publication information (when and where) - Tag: PUBL
  3. Inside the repository entity : it will be a shareable piece of information. It may contain the following information.
    • The repository Name - Tag: NAME
    • The physical address of the repository - Tag: ADDR
    • The Internet address - Tag: WWW
    • contact number (phone, email, fax) - Tag: PHONEMAILFAX.

We recommend a principle of efficiency which is to store information in a shareable place if it can be used for several events, or in non-shareable place if it ever be used for a single event, that is to say for a unique individual , or a unique family. See the shared information page for more details.

For the source, this is all the more relevant as it includes a text that is often long to transcribe. It is out of question to enter it several times. We note that this text could be stored in two different places, hence a choice to be made.

So now, a first question: where do we put a marriage certificate and the text of its transcription?

The principle of efficiency tells us that it is safer to enter a marriage certificate in a source entity rather than in a source property.

A marriage certificate could constitute a source of information about several events. That of the marriage of the spouses of course, but it also often informs us about the existence of other individuals, potentially on their name, date and place of birth. The absence of a parent of one of the spouses can also give us some clues about their likely death date.

It is therefore beneficial to enter a marriage certificate in a shared source, therefore in a Source entity.

  • The shared source and its text are only entered once
  • The shared source can be referenced later by any other genealogy event
  • The shared source can be accessed directly from the table of entities

And the next question is: but then, where do you enter the register which contains the certificate?

According to the Gedcom standard, the registry is rather entered in a source, and the marriage certificate is a page of the registry, which naturally fits into a source property. But then our principle of shared information no longer works.

In addition, the Gedcom standard could suggest to define a cemetery as a repository, and a grave as a source entity. If a cemetery is a repository, why shouldn't a register be a repository? Not easy therefore because in real life, the sources of information are not just arranged on 2 shared levels of information.

Possible choices

Here are possible solutions observed in practice for the example above. There may be others.

Nb Individual Source Repository

Source property
Event

Page/

Quality

Text/Media Title Text/Media Ref repository / Media support
1 Marriage -/3 - Marriage certificate

Text

+ Media

Section 3AB12- Baptism Marriage Burial Register of 1787-nb12 p219/

Manuscript

National Archives of  Boston
2 Marriage p.219/3

Text
(Marriage of ...)

+ Media

Baptism Marriage Burial Register of 1787 -

Section 3AB12/

Manuscript

National Archives of  Boston


About choice number 1 above

  • The useful information of the source property is the quality
    • This information can only be in the event because it indicates the quality of the source to justify the event, not the quality of the source as such.
  • The indication of page numbers or act numbers will rather be included in the reference to the register rather than in the page on the event side, or in the title of the source
    • Indeed, if you indicate several repositories for a source (which would then obviously be in different form and with the same content), the act or page number no longer makes sense for several repository referenced at the same time.

About choice number 2 above

  • When the register is a source, the text and the media clearly go to the event side
  • The page number makes sense for the event
  • The only place to enter the title of the deed is in the text of the source

    How to decide? By looking at how many events you will have on average to attach to the same act, and how many acts you will have in the same register.

    The closer the ratio is to 1, the more things will have to be stored in the same place, and the larger the ratio, the more they will have to be separated.

    • if you think you have a lot of events for the same act, you have to separate the act from the event, otherwise you will spend your time re-entering the same act many times.
    • if you think you have a lot of acts in the same register, the more it will be necessary to separate the register of acts. It might also be interesting in this case to merge the register with the repository, but it all depends on whether you have a lot of registers for the same repository.

    Our recommendation is to favour information shared at the level of acts, therefore choice number 1 above. This is what the Cygnus editor does. The other two editors allow you to make the choices you want.

    As you generalize, you may find it useful to make this type of summary table for all the kinds of sources and repositories you come across.


    Associating a source with a repository

    As we said above, we can create a source and then a repository, or the other way around.

    The creation of entities is not documented here. This can be done from the 3 editors, from the contextual menu and from the Aries edit bar.

    Example for the creation of a repository with the contextual menu from any entity.

    en-create-repository.png

    Creation of a repository from the button bar.

    Créer_Dépôt_Barre.png

    The most important part is the association between the two.

    Several solutions exist depending on the editor used.

    Using the Cygnus editor

    With Cygnus, when you are editing a source, click on the Repository button at the bottom right.

    This button is only available if a source is actually being edited.

    en-create-repository-cygnus.png

    Clicking on this button opens the window for choosing a repository, existing or to be created.

    en-edit-repository.png

    In this window, the detailed content of the repository selected on the right hand side, is showing at the top of the left hand side.

    The part in the middle is the list of used sources referenced by this repository.

    The data at the bottom displays the references, in the repository, of the source being edited, that is to say the one from which we clicked just before. In this editor you can only put one reference.


    Using the Aries editor

    With Aries, when editing a source, either directly from a source entity, or from the source of an event, choose the repository tab then click on one of the two highlighted buttons.

    en-create-repository-aries.png

    In the case of the Attach button, a list of repositories appears, you just have to choose one.

    In the case of a repository that does not already exist, the following window appears.

    en-create-repository-aries-description.png

    This window contains exclusively the data of a deposit to be entered.

    Once the repository data has been entered, you will return to the previous window where you can then indicate the index and the type of Media.

    en-create-repository-aries-2.png


    Using the Gedcom editor

    From the Gedcom editor, go to the Source entity, then right click anywhere on the top panel of the Gedcom editor, and choose Add a media, a note, a source, etc. then Add a repository.

    en-create-repository-gedcom.png

    The following window appears, either to create a new repository, or to choose one from the list.

    en-create-repository-gedcom-new.png

    Assuming you choose to create a new repository, you then see this window, which shows the fields of a repository. You may want to complete the full address.

    en-create-repository-gedcom-description.png

    If you go back to the previous entity, i.e. the source entity, by clicking on the left arrow in the navigation bar, you see that the repository has been added.

    The references of the repository are added by right-clicking the REPO line, and choosing "Add a property directly", then CALN.

    en-create-repository-gedcom-caln.png

    Then again by clicking on CALN to add MEDI.

    You get the following result.

    en-create-repository-gedcom-medi.png

    There you go.

    You might have noticed the differences of efficiency and transparency of the respective editors.