8.2. Maak Nieuwe Stamboom

Create your genealogy


You will see how simple it is to create a genealogy from scratch with Ancestris. You will create a first individual, the parents and close family like children and brothers and sisters, thus having your first genealogical tree with one or two generations.

Creating a genealogy usually starts with creating the first person and specifying information like the birth date and place for instance. Then other persons are added, such as the parents, brothers and sisters, cousins and grandparenst. A new person is always linked to a person already in the tree, these are the relationships. For eaxmple parent - child, or partner1 - partner2. In this way you will continue to expand the tree.

Well, with Ancestris, you can exactly do the same!


Create the first individual

During the guided tour, we used the Bourbon genealogy, Bourbon file. This is an example of a genealogy supplied with Ancestris.

If this tree is still open, we first have to close it. To close Bourbon, just click on the red cross on the toolbar  at the top of the window.

en-create-0.png

And now, let's create your own genealogy. If the Welcome page is still visible, click the button Create a genealogy or click button_create-genealogy.png at the left on the toolbar.

The following window appears. 

en-create-1.png

Fill in the name "John Doe", male, and click OK. The next window appears:

en-create-1b.png

Ancestris will then ask you for the location and file name to save your genealogy information.

As you can see, the information is directly saved as a Gedcom file. Gedcom files have the extension ".ged". The filename Ancestris chooses, is the lastname of the person that was just filled in, (Doe), so the file is named "Doe.ged". Navigate to the correct directory. Press Create to save. That's it.

Ancestris will now show a genealogy tree in the dynamic tree view on the left side of the window. This tree is made up of one person only: you.

en-create-1c.png

On the right hand side, the Cygnus editor is also opened. The Cygnus editor shows the detailed information of the person currently selected in the dynamic tree view on the left. (Maybe on your screen the last name is written as "DOE". So in all capitals. The xplanation of this you will find near the end of this page.

Short summary of Cygnus fields and buttons:

en-create-1d.png

Click here for an explanation of the numbers

Explanation of the numbering:

  1. Buttons that scroll forward or backward through previous content in this editor. (previous persons)
  2. Button to create the father.
  3. Button to create the mother.
  4. Button to create the partner.
  5. Button with which the children can be created.
  6. Birth data can be entered in these fields. For example the date and possibly time.
  7. Place of birth field. This field can be expanded to search in existing places. The green globe can also be used to transfer data from a map.
  8. Any notes can be created via the green plus.
  9. Sources can be added via the green plus. Including any associated data.
  10. A photo or photos can be added here.
  11. Scans of deeds and the like can be added with the green plus. Including all associated data.

We will not go into much detail here about how to enter things exactly, because you will find that on the "Cygnus Editor" page.

If you want to know the meaning of a button, hold the mouse over the button and more information will appear in a popup. That goes for any button on any screen.

With this Cygnus editor you can now complete the missing data, such as the date and time of birth (field 6), your place of birth (field 7). But you can also add a photo (10). To add more names:

en-create-more-names.png

Click on the green button "Details name", as above, the  Details screen opens::

en-create-more-names2.png

Here you can enter more names, titles and the like.

Save changes in the Cygnus editor:

en-create-1e.png

As soon as you have entered something, for example the date of birth, or more names or other data, two buttons will appear at the bottom right. OK saves the changes, Cancel cancels them.

Create your parents

Creating parent can be done either from the dynamic tree view or from the Cygnus editor.

In the pedigree overview on the left side of the screen, right-click on the desired person, in this case "John Doe". (For Mac users with 1 mouse button use cntr click) A popup menu will appear:

en-create-add-father-tree.png

This method of entering individuals, is very visible. To add your father, you choose for "Add a father".

In the Cygnus editor (as seen below) we use the big button for "Father". This method is faster. The "Father" button is located in the top left of the Cygnus editor screen. (The "Mother" button is on the right)

en-create-add-father-cygnus.png

After clicking the appropriate button, the "Add a father" screen will appear:

en-create-add-father-tree-b.png

You click on "Proceed and add a father". Then your tree will look like this:

en-create-add-father-tree-c.png


In both cases, you get two more boxes in the tree, above your own: These are your parents. Your father (2) is created (yellow), but for your mother (3) only a placeholder (white) is visible. The entity corresponding to her is not yet created.

Explanation of the numbers:
  1. Field of your own. With first name and last name, because they were known. On the right is the internal number assigned to your person, here "I00001" (The I of Individual). The red square on the right means that important information about you is still missing. The small icon on the left under your name means: "Born", which may contain your birth data.
  2. Your father's field. Only the surname is known here, so the first name is missing. Your father gets number "I00002".
  3. Your mother's field. All data is still missing.
  4. Field in which the FAMS (=relationship) data will appear. For now only the relationship number "F00001" (The F comes from Family).
  5. This is the relationship symbol (2 rings) it stands between both partners of the relationship. The symbol changes when they are divorced.

Ancestris default setting creates only one parent at a time. It could be interesting to try and create both. To do so, go to preferences, using the main menu "Options / Preferences" Choose the Editing tab, or click on  Preferences_bouton.png  at the top right of the main window.

en-create-add-father-tree-d.png

On the Preferences screen, select the "Edit" tab, and check the option "Automatically create both parents when adding a parent". Then click OK (at the bottom) to save this change.

On the father's field, the family name is automatically derived from the individual from which the father was created.

Now enter your father's details in the Cygnus editor (name (Peter), date and place of birth, etc.). Click the OK button when you are done to save the data.

To create the mother, right click on the field of "William" and choose "Add a partner" from the popup menu. Either you select the field of "John" and click on the corresponding "Mother" button in the Cygnus editor, or you right-click in your own field "John", and then choose in the popup menu: "Add a mother". You fill in her details and click OK.

en-create-family-filled.png


Create your close relatives

Next you can create your brothers and sisters, and your partner and children, etc. in the same manner.

If you make a mistake, it is always possible to correct the information directly or simply undo the creation of the new individual. To do that you click on the Undo button en-undo-button.png on the toolbar at the top of the screen and start over.

Once you have created all the individuals of your close family, just click on your own box to return to yourself.

Add information about your family

Let's suppose you want to enter your parents wedding date.

Click on the family box, the one between yours and your parents's. It is box number F00001 on the Dynamic tree view at the leftside of your screen.

In the  Cygnus editor, you will now see your father's information, and Cygnus will select the nuclear family he constitutes with your mother. (Mary Smith) Note that there is an "x-" in the line (after Mary's date of birth), but that no wedding date has been entered there yet.

en-create-family-select.png

From there, click on the "Marriage" button on the Cygnus editor. (The one with two rings)

en-create-family-select2.png

The marriage event is created. Enter the date and place, if known.

en-create-family-select3.png

Behind "Marriage" you type what type of wedding event it is (e.g. Church wedding). The first time, with a completely new family tree, you will not see any data yet when you expand this field downwards. So you just fill in "Churche wedding". If later you enter a next marriage, you will see:

en-create-family-select4.png

So Ancestris remembers which options you have already filled in a previous time. Because next time you enter a wedding type, you can choose from this box, there is less chance of entering errors or deviating texts.

For more information about possible entries for the marriage field, see below under: possible marriage descriptions near the bottom of this page.

After entering all your data, click OK and that's it. Here is the result:

en-create-family-nucleus.png

Note there now is a marriage date present after the "x-" (June, 1, 1986), on the line with "Mary Smith".

Here is the current tree: